HORNS
A collection of horns we've designed / made and things
we're currently TESTING / building.
[ALL] AVAILABLE UPON INQUIRY
MODEL:
LS-900
CUTOFF:
900HZ
DIMENSIONS:
11.5W x 8.5L x 5H
THROAT EXIT:
1 INCH
The LS-900 is the big brother of the LS-1090. Designed to cutoff at 900HZ; it loads slightly lower than the LS-109. Same design, same geometry, just goes a bit lower.
This horn is also available with a threaded throat apart from a standard 1 inch compression driver mounting. Why? This allows you to use the horn. We've had a lot of our clients use this horn as a replacement for the JBL waveguide horn included in the OJAS Artbook Shelf Horn Mod which uses the JBL 2412H Compression Driver.
After modeling quite a few different designs for a 500HZ cutoff, we wanted to create a smaller bookshelf size for this design. The vanes go quite farther back than the 11-90 series just to help with beaming. Longer vanes also give a bracing to the horn.
The LS-1090 is the result. Taking inspiration of the dimensions and sectoral design of the KS-12025, and the dispersion and sweep techniques in the 311-90.
The horn was designed for Jesus Brazon of CSU for Caracas Bakery to couple with his existed beautiful hand made cabinets. Because of end use and location - bakery, messy, flour, etc - we decided to stick to 3D priting the horns with PLA CF and several finishing stages to achieve the final result.
Upon inquiry they are also available in sand casted aluminum.
HELLO@LUPO--STUDIO.COM
INSTAGRAM